Equator Adventure Carbon Fork

A few technical details so you know it's right for you

Whether you have a titanium bike from us or any bike from anyone else, we stand behind this fork.

Tapered neck, 28" tire clearance up to 50mm, 12 x 100mm solid axle and flatmount caliper mounting.
The shiny area around the logo is also reflective, because passive safety can look good too.

Variable biasing thanks to Flip Chip

In minutes you can increase the fork preload from 47 to 52 millimetres for even more adventure and more stable handling.
In addition to swapping the Flip Chip, you still need to replace the caliper washer (both fork washers are supplied).

Flatmount and internal wiring

Apart from a certain elegance, you mainly see the flatmount caliper assembly and the partial internal wiring harness with the left foot. The output is realized before the neck, so it is not a fork for internal routing through the frame, although we also offer such a model.

Long, long neck

Sometimes you need to put your handlebars higher on gravel, and we understand. From the crown, you have a full 350 millimeters of quality carbon to cut into.
We just recommend trimming back gradually, because once you do, you can't go back.

And if you don't dare to cut, let us know how long you want the neck and we'll professionally shorten it for you (unfortunately, such a fork cannot be returned within 14 days without giving a reason).